Total Light 6 Inch Brass Hardscape Light Remote Dimmable and 2700/3000K

Product Overview

The Total Light TL-HS200-6-CB is a 6-inch, 12V low-voltage hardscape light designed to add warm, controlled illumination to masonry and outdoor-living features. Its low-profile shape fits beneath capstones, ledges and projecting surfaces, allowing the fixture to light the face of a wall, the edge of a step or the area beneath an outdoor counter while keeping the light source less noticeable. The solid-brass fixture is finished in Classic Brass for a coordinated appearance with other Total Light landscape fixtures.

A removable stainless-steel mounting bracket provides flexibility when planning installation in stone, brick, paver and similar structures. The fixture pivots after mounting, helping the installer direct light toward the intended surface and reduce direct glare or concentrated hot spots. This makes it useful for outdoor kitchens, retaining walls, seating walls, columns, built-in benches, steps and other hardscape features where the final beam position may need adjustment after the surrounding materials are in place.

The HS200 uses a replaceable integrated LED module. The light source can be serviced without removing the mounting plate, helping simplify future maintenance. When paired with the optional Total Light TL-REMOTE, the fixture can be dimmed, switched on or off, and set to either 2700K or 3000K. The remote is sold separately. Stainless-steel mounting screws and anchors are included, and the fixture carries an ETL certification along with lifetime residential and commercial warranties. Review the linked product specification sheet before preparing the mounting area or completing the surrounding masonry.

View the compatible Total Light TL-REMOTE

Key Features

• 6-inch hardscape-light model
• 12V low-voltage operation
• Solid-brass fixture with Classic Brass finish
• Replaceable integrated LED module
• Selectable 2700K or 3000K color temperature with the optional TL-REMOTE
• Remote dimming and on/off control when paired with the optional TL-REMOTE
• Pivoting fixture helps direct light and reduce glare
• Removable stainless-steel mounting bracket
• Stainless-steel screws and anchors included
• ETL certified
• Lifetime residential and commercial warranties

Common Uses

• Outdoor kitchens and grill islands
• Retaining and seating walls
• Stone, brick and paver structures
• Columns and masonry posts
• Steps and changes in elevation
• Built-in benches and raised planters
• Capstones and wall ledges
• Low-level architectural and guidance lighting

Technical Specifications

• Model: TL-HS200-6-CB
• Fixture Type: Hardscape light
• Operating Voltage: 12V low voltage
• Light Source: Replaceable integrated LED module
• Color Temperature: Selectable 2700K or 3000K with compatible remote
• Control: Remote dimming, CCT selection and on/off control with TL-REMOTE
• Fixture Material: Solid brass
• Mounting Bracket: Removable stainless steel
• Finish: Classic Brass
• Certification: ETL
• Residential Warranty: Lifetime
• Commercial Warranty: Lifetime
• UPC: 00810016891376

Dimensions

• Fixture Size: 6-inch model

Refer to the product specification sheet for the current dimensional drawing and mounting details.

LED Module and System Compatibility

The TL-HS200-6-CB includes a replaceable integrated LED module and does not use a separate G4 or MR16 lamp. It is intended for a compatible 12V low-voltage landscape-lighting system. The optional TL-REMOTE is required to adjust brightness, select 2700K or 3000K and operate the supported remote on/off functions.

View the compatible Total Light TL-REMOTE

Installation and Planning Notes

• Plan the fixture location and wire route before completing the surrounding masonry, paver or capstone work.
• Use the removable stainless-steel bracket to position the fixture beneath a suitable ledge or projecting surface.
• Adjust the pivoting fixture after mounting to direct illumination toward the intended wall face, tread, counter edge or walking area.
• Leave adequate access for the replaceable LED module when possible.
• Use outdoor-rated low-voltage cable and connectors appropriate for the installation environment.
• Confirm transformer capacity, cable length and voltage drop for the complete lighting layout.
• Review the specification sheet before preparing mounting openings or finalizing surrounding materials.
• Follow applicable electrical and building requirements.

What Is Included

• One Total Light TL-HS200-6-CB hardscape-light fixture
• Replaceable integrated LED module
• Removable stainless-steel mounting bracket
• Stainless-steel mounting screws and anchors

What Is Not Included

• Total Light TL-REMOTE
• Low-voltage transformer
• Main landscape-lighting cable
• Wire connectors
• Project-specific masonry or mounting materials

Product Specification Sheet

Frequently Asked Questions

Does the TL-HS200-6-CB require a separate lamp?

No. The fixture includes a replaceable integrated LED module and does not use a separate G4 or MR16 lamp.

Is the TL-REMOTE included?

No. The compatible TL-REMOTE is sold separately and is used for dimming, 2700K or 3000K selection and supported on/off control.

Can the light direction be adjusted?

Yes. The fixture pivots after mounting so the beam can be directed toward the intended hardscape surface while helping reduce direct glare and hot spots.

What mounting hardware is included?

The fixture includes a removable stainless-steel mounting bracket, stainless-steel screws and anchors. Project-specific masonry materials, low-voltage cable and wire connectors are not included.

Why Choose Total Light?

The TL-HS200-6-CB combines solid-brass construction, a serviceable LED module, adjustable aiming and optional remote control in a compact hardscape fixture. Its removable stainless-steel bracket and included mounting hardware support a range of stone, brick, paver and outdoor-living applications while the selectable warm-white output helps coordinate the fixture with the surrounding landscape-lighting design.