Total Light® Deck Light

Product Overview

The Total Light TL-DL100-CB Deck Light is a compact 12V low-voltage fixture designed to provide soft, downward-directed illumination on decks, steps and outdoor architectural surfaces. Its half-moon shape helps conceal the lamp from direct view while guiding light toward the mounting surface and the area below. This makes the fixture well suited for locations where visible glare would be distracting, such as deck posts, stair approaches, railing supports, walls and outdoor gathering areas.

The fixture is constructed from solid brass and finished in Classic Brass for a coordinated appearance with other Total Light brass landscape-lighting fixtures. It uses a replaceable LED G4 bi-pin lamp, sold separately, allowing the installer to select a compatible color temperature and light output for the project rather than relying on a permanently integrated light source. Stainless-steel mounting screws are included for attachment to a suitable surface, while the installer remains responsible for confirming that the surface and mounting method can properly support the fixture.

The TL-DL100-CB is ETL certified and carries lifetime residential and commercial warranties. It requires a compatible low-voltage transformer, landscape-lighting cable and approved outdoor wire connections to operate. Fixture spacing should be planned according to mounting height, the width of the area being illuminated and the lumen output of the selected G4 lamp. For the current fixture drawing and additional product information, refer to the SKU-specific specification sheet provided below.

Key Features

• Half-moon deck-light profile directs illumination downward
• Helps shield the G4 lamp from direct view
• Solid-brass fixture construction
• Classic Brass finish
• Replaceable LED G4 bi-pin lamp system
• Designed for 12V low-voltage landscape lighting
• Stainless-steel mounting screws included
• ETL certified
• Lifetime residential warranty
• Lifetime commercial warranty

Common Uses

• Deck and railing posts
• Outdoor steps and stair approaches
• Patio and porch walls
• Brick and stone columns
• Retaining and seating walls
• Outdoor kitchens and entertaining spaces
• Low-level guidance lighting
• Architectural accent lighting on vertical surfaces

Technical Specifications

• Fixture Type: Half-moon deck light
• Voltage: 12V low voltage
• Lamp Type: LED G4 bi-pin
• Lamp Included: No
• Material: Solid brass
• Finish: Classic Brass
• Color: Brass
• UPC: 810016890133
• Certification: ETL
• Residential Warranty: Lifetime
• Commercial Warranty: Lifetime

Lamp and System Compatibility

The TL-DL100-CB uses a replaceable 12V LED G4 bi-pin lamp. Select a compatible lamp based on the preferred color temperature, light output, mounting height and fixture spacing. This fixture must be connected to a compatible low-voltage landscape-lighting transformer and outdoor wiring system. The G4 lamp, transformer, main cable and wire connectors are sold separately.

View compatible Total Light LED G4 lamps

Installation and Planning Notes

• Install only as part of a compatible 12V low-voltage landscape-lighting system.
• Position the opening so light is directed toward the intended step, walkway or surface.
• Use the included stainless-steel screws only when they are suitable for the mounting surface.
• Use appropriate anchors or additional fasteners when required by the wall, post, masonry or other substrate.
• Use approved outdoor wire connections and follow applicable electrical and building requirements.
• Confirm transformer capacity and voltage drop when multiple fixtures share the same cable run.
• Plan mounting height and spacing around the output of the selected G4 lamp.
• Keep the fixture opening clear of debris that could block illumination.
• Refer to the specification sheet for the current fixture drawing and additional product details.

What Is Included

• One Total Light TL-DL100-CB Deck Light
• Solid-brass half-moon fixture body in Classic Brass
• Stainless-steel mounting screws

What Is Not Included

• LED G4 bi-pin lamp
• Low-voltage transformer
• Main landscape-lighting cable and wire connectors
• Surface-specific anchors or additional installation materials

Product Specification Sheet

Use the current specification sheet for the fixture drawing and additional product information.

Frequently Asked Questions

Does the TL-DL100-CB include an LED lamp?

No. The fixture uses a replaceable 12V LED G4 bi-pin lamp, which is sold separately.

Can this deck light connect directly to household voltage?

No. It is designed for a compatible 12V low-voltage landscape-lighting system and requires an appropriately sized transformer.

Are mounting screws included?

Yes. Stainless-steel mounting screws are included. The installer should confirm that the screws and mounting method are appropriate for the installation surface.

What is the benefit of the half-moon design?

The curved shield helps conceal the lamp from direct view and directs light downward toward steps, walking surfaces and nearby architectural features.

Why Choose Total Light?

Total Light fixtures are designed to support coordinated low-voltage landscape-lighting systems with replaceable lamps and accessible product resources. The TL-DL100-CB combines a compact shielded profile, solid-brass construction and flexible G4 lamp selection for deck, step and architectural guidance lighting.